ProCap® tabletop cover 160–225 cm

Cover Solutions CS-TT tabletop cover for garden tables from 160 to 225 cm long

Protect the top of your garden table from rain, dirt, dust and UV exposure with a Cover Solutions CS-TT tabletop cover. The cover fits over the tabletop like a compact protective cap and is H: 15 cm high. This protects the tabletop without covering the complete table and legs.

The CS-TT series is available in four lengths: 160, 180, 200 and 225 cm. Every model is 100 cm wide and H: 15 cm high. The grey covers feature two Click-and-Close straps and a drawstring with stopper for secure fastening.

Why choose a Cover Solutions CS-TT tabletop cover?

• Specially designed to protect rectangular garden table tops
• Four lengths from 160 to 225 cm
• All models are 100 cm wide and H: 15 cm high
• No additional clearance needs to be added when choosing your size
• Two Click-and-Close straps for securing the cover to the table legs
• Drawstring with stopper for additional security in windy conditions
• 205 g/m² ProCap® material for long-term outdoor use
• Waterproof construction with welded seams
• Breathable, UV-resistant, hard-wearing, antibacterial and PFAS-free
• Tested according to OEKO-TEX® Standard 100
• Washable at a maximum of 30 °C
• Made in Germany with a 2-year warranty

Which size tabletop cover do you need?

Before ordering, measure the full length and width of your tabletop. Measure from the furthest point on the left to the furthest point on the right, then from front to back. Include any projecting edges, trim or other parts that need to fit underneath the cover.

You do not need to add extra centimetres for clearance. If the length and width of your tabletop are equal to or smaller than the dimensions of the selected CS-TT cover, it will fit in terms of size. For example, a 180 × 100 cm tabletop fits the CS-TT180 measuring 180 × 100 H: 15 cm.

The CS-TT series is available in the following sizes:

How to measure your tabletop for the correct cover

First measure the full outside length of the tabletop. Then measure the width at its widest point. Do not rely solely on the manufacturer's stated table dimensions; always check the actual outside dimensions yourself.

Example: if your tabletop measures 178 × 98 cm, the CS-TT180 measuring 180 × 100 H: 15 cm will fit. A tabletop measuring exactly 180 × 100 cm will also fit. There is no need to add extra centimetres to your measurements.

How important is H: 15 cm?

The CS-TT protective cover is H: 15 cm high. It extends down from the top and around the outside edge of the tabletop. The CS-TT is therefore specifically designed as a tabletop cover, rather than a cover for the entire garden table, frame and legs.

Before ordering, also check the thickness and shape of the table edge. Projecting parts that need to be covered must fit within the available H: 15 cm height.

160, 180, 200 or 225 cm: which size fits?

Choose the smallest CS-TT size that accommodates the full length and width of your tabletop. You do not need to add extra clearance. If your tabletop measures 175 × 95 cm, for example, the CS-TT180 measuring 180 × 100 H: 15 cm is the appropriate size. There is no need to choose the larger CS-TT200.

This prevents unnecessary excess material around the tabletop. Measure carefully and do not automatically select a larger cover simply to create extra room.

ProCap® material: waterproof, breathable and UV-resistant

Cover Solutions CS-TT tabletop covers are made from 205 g/m² ProCap® material. The outer layer consists of 100% polyurethane and the inner layer of 100% polyester. The material is designed for long-term outdoor use.

The tabletop cover has a waterproof construction with welded seams. The breathable material helps moisture escape and reduces condensation underneath the cover. It is also UV-resistant, hard-wearing, antibacterial and PFAS-free.

Protection against rain, dirt and sunlight

A garden tabletop left outdoors is exposed to rain, dirt, dust and prolonged sunlight. The CS-TT creates a protective layer between the tabletop and these outdoor conditions whenever the table is not in use.

Ventilation remains important during prolonged outdoor use. Ideally, fit the cover over a clean and dry tabletop. During extended periods of use, check occasionally for trapped moisture and air the cover during dry weather when necessary.

Click-and-Close straps and drawstring with stopper

Each CS-TT tabletop cover features two Click-and-Close straps and a drawstring with stopper. Use the straps to secure the cover to the table legs. Tighten the drawstring around the lower edge and secure it with the stopper. Together, they help keep the cover securely in place and reduce lifting in windy conditions.

Always check the cover and its fastenings when strong winds or storms are expected. Wind forces can be considerably higher on exposed patios, balconies and other open locations.

Which tables are suitable for the CS-TT series?

The CS-TT series is designed for rectangular garden tables where the tabletop and outer edge require protection. Available sizes range from 160 × 100 H: 15 cm to 225 × 100 H: 15 cm.

If you also want to cover the complete frame and table legs, choose a protective cover designed for the entire garden table. The CS-TT series is specifically intended for compact protection of the tabletop.

Need a different length or width? Take a look at our Raffles Covers RTT tabletop covers, available in 17 different models and sizes.

Care and maintenance of your CS-TT tabletop cover

• Ideally fit the cover over a clean and dry tabletop
• Remove surface dirt with lukewarm water and a soft cloth or brush
• The protective cover is washable at a maximum of 30 °C
• Do not use aggressive cleaning agents, bleach or solvents
• Allow the cover to dry completely before storing it
• Avoid prolonged contact with sharp edges that could damage the material

Avoid choosing the wrong size

A good fit starts with accurate measurements. Always check the maximum length and width of the tabletop, including projecting edges. Do not add extra clearance to these measurements. If the tabletop is equal to or smaller than the length and width of the cover, it will fit in terms of dimensions.

Not sure which size fits? Use our product finder and compare the actual dimensions of your tabletop with the available protective covers.

Frequently asked questions about CS-TT tabletop covers

Which size do I need for a 180 × 100 cm tabletop?

For a tabletop measuring exactly 180 × 100 cm, choose the CS-TT180 measuring 180 × 100 H: 15 cm. You do not need to add extra centimetres for clearance.

Do I need to add extra room to my tabletop measurements?

No. With the CS-TT series, you do not need to add extra centimetres for clearance. If your tabletop is equal to or smaller than the cover's length and width, it will fit in terms of size.

Are the table legs also covered?

No. The CS-TT is specifically designed to protect the tabletop and its outer edge. At H: 15 cm high, the cover extends down around the edge rather than covering the complete table legs. The Click-and-Close straps are used to secure the cover to the legs.

Can I use the cover on a tabletop wider than 100 cm?

No, not within the CS-TT series. All four CS-TT models are 100 cm wide. For a tabletop wider than 100 cm, choose another size or range of tabletop covers.

Which lengths are available?

The Cover Solutions CS-TT tabletop cover is available in lengths of 160, 180, 200 and 225 cm. All four models are 100 cm wide and H: 15 cm high. Need different dimensions? View our Raffles Covers RTT tabletop covers, available in 17 different models and sizes.

Is the CS-TT tabletop cover waterproof?

Yes. The CS-TT is made from ProCap® material and has a waterproof construction with welded seams. The material is also breathable, helping moisture escape and reducing condensation underneath the cover.

How do I secure the tabletop cover in windy conditions?

Secure the two Click-and-Close straps around the table legs and tighten the drawstring with stopper around the lower edge. Check both fastenings when strong winds or storms are expected.

Find the right Cover Solutions tabletop cover

Measure the maximum length and width of your tabletop before ordering. Do not add extra centimetres to your measurements. Not sure which size you need? Use our product finder to find a suitable protective cover based on your measurements.

Order before 17:00 on a working day and your order will be dispatched the same working day.