ProCap® tabletop cover 100 x 100 cm

Cover Solutions CS-TT100 tabletop cover – 100 × 100 H: 15 cm

The Cover Solutions CS-TT100 tabletop cover protects a square tabletop against rain, dirt, dust and UV exposure. The grey cover measures 100 × 100 H: 15 cm and fits like a compact cap over the tabletop and outer edge. This protects the tabletop without covering the entire table.

Suitable for tabletops up to 100 × 100 cm: the CS-TT100 is suitable for square tabletops with a maximum length and width of 100 cm. A tabletop measuring exactly 100 × 100 cm will also fit. Do not add extra centimetres for clearance to your measured dimensions.

Why choose the Cover Solutions CS-TT100?

• For square tabletops up to a maximum of 100 × 100 cm
• Cover dimensions: 100 × 100 H: 15 cm
• No need to add extra centimetres for clearance
• 2 Click-and-Close straps and a drawstring with stopper for secure fastening
• ProCap® material weighing 205 g/m²
• Waterproof construction with welded seams
• Breathable, UV-resistant, hard-wearing, antibacterial and PFAS-free
• OEKO-TEX® Standard 100, washable at up to 30 °C
• Made in Germany with a 2-year warranty

Will the CS-TT100 fit your tabletop?

How to measure your tabletop: measure the maximum length and width across the furthest projecting points. Include edges, trim and other projecting parts that need to fit underneath the protective cover. Always check the actual outer dimensions rather than relying solely on the manufacturer's stated table size.

Example: a tabletop measuring 98 × 98 cm or exactly 100 × 100 cm will fit in length and width. A tabletop measuring 103 × 98 cm will not fit because one side exceeds 100 cm.

H: 15 cm and the fit

The CS-TT100 is H: 15 cm high and extends down from the top along the outer edge of the tabletop. Check the thickness and shape of the tabletop edge as well. Any projecting parts that need to fit underneath the cover must be accommodated within this height. The CS-TT100 protects the tabletop and outer edge, not the entire table or table legs.

ProCap®: waterproof, breathable and UV-resistant

The CS-TT100 is made from ProCap® material weighing 205 g/m². The outer layer is 100% polyurethane and the inner layer is 100% polyester. Its waterproof construction with welded seams protects against precipitation. The breathable material helps moisture escape and reduces condensation. ProCap® is also UV-resistant, hard-wearing, antibacterial and PFAS-free.

Fastening in windy conditions

The CS-TT100 has 2 Click-and-Close straps for securing the cover to the table legs and a drawstring with stopper around the lower edge. Tighten the drawstring for a closer fit around the tabletop. Check the fastening carefully when strong winds or storms are expected.

Care

• Preferably place the cover over a clean and dry tabletop
• Remove surface dirt with lukewarm water and a soft cloth or brush
• Wash the protective cover at a maximum of 30 °C
• Do not use bleach, solvents or aggressive cleaning products
• Allow the cover to dry completely before storing it

Does your tabletop have different dimensions? Use our product finder to find a suitable protective cover.

Frequently asked questions about the CS-TT100

Will a tabletop measuring exactly 100 × 100 cm fit?
Yes. A tabletop measuring exactly 100 × 100 cm will fit in length and width. You do not need to add extra centimetres for clearance.

Will a 103 × 98 cm tabletop fit?
No. Both sides must be no more than 100 cm. Because one side measures 103 cm, the CS-TT100 is too small.

Does the cover also cover the table legs?
No. The CS-TT100 protects the tabletop and outer edge. The straps are attached to the table legs to help keep the cover securely in place.

Is the CS-TT100 waterproof?
Yes. The ProCap® tabletop cover has a waterproof construction with welded seams. The material is also breathable to help moisture escape.

How do I secure the CS-TT100 in windy conditions?
Fasten the 2 Click-and-Close straps to the table legs and tighten the drawstring with stopper around the lower edge.

Avoid ordering the wrong size: measure the maximum length and width of your tabletop before ordering. For the CS-TT100, both sides must be no more than 100 cm. Do not add extra centimetres to your measurements. Not sure which size you need? Use our product finder.

Order before 17:00 on a working day and your order will be dispatched the same working day.