Garden Table Cover 100 x 100 cm | ProCap®

Cover Solutions CS-TC100 – Square Garden Table Cover, 100 × 100 cm, 75 cm High

The Cover Solutions CS-TC100 covers a square garden table from top to bottom: tabletop, frame and legs. It measures 100 × 100 cm and is 75 cm high, so your table stays clean and dry outdoors, even when it goes unused for weeks. The ProCap® fabric keeps out rain, dirt, dust and UV light.

Features

• For square garden tables up to 100 × 100 cm
• 75 cm high, covering the tabletop, frame and legs
• 4 Click-and-Close straps and a drawcord with toggle to stop it blowing off
• ProCap®, 205 g/m²: 100% polyurethane outer, 100% polyester inner
• Waterproof with welded seams
• Breathable, UV-resistant, hard-wearing, antibacterial and PFAS-free
• OEKO-TEX® Standard 100, machine washable at 30 °C
• Made in Germany, 2-year guarantee

Will the CS-TC100 fit your table?

Measure the length and width of the whole table at its widest points. That is usually the edge of the tabletop, but splayed legs or a wide base can stick out further. If both measurements are 100 cm or less, the cover fits. There is no need to add extra room: a table measuring exactly 100 × 100 cm fits too.

• 95 × 95 cm table: fits
• 100 × 100 cm table: fits
• 103 × 98 cm table: too big, one side is over 100 cm

Rectangular table longer than 100 cm? Choose a CS-TC in 160, 180, 200 or 225 × 100 cm instead.

What about the height?

At 75 cm, the cover matches the height of most garden tables. If yours is a little taller, the cover simply stops a few centimetres above the ground. That actually helps: air can get in underneath, so less condensation builds up.

Securing the cover in windy weather

Pull the drawcord tight around the bottom hem and lock it with the toggle. Then clip the four Click-and-Close straps around the table legs. If your table stands on an exposed patio or balcony, or a storm is forecast, check now and then that everything is still secure.

Only want to protect the tabletop?

If you would rather leave the legs uncovered, for example because the chairs are tucked underneath, the CS-TT100 tabletop cover (100 × 100 cm, 15 cm drop) is the better choice. It fits over the top and edge only.

Care

• Ideally, put the cover on a clean, dry table
• Remove loose dirt with lukewarm water and a soft cloth or brush
• Machine wash at up to 30 °C when needed
• Do not use bleach, solvents or harsh cleaners
• Let the cover dry completely before storing it
• Avoid prolonged contact with sharp edges
• During long periods of use, check underneath now and then for trapped moisture and air the cover on a dry day

CS-TC100 FAQs

Will a table of exactly 100 × 100 cm fit?

Yes. 100 × 100 cm is the maximum size, and it fits. You do not need to allow extra room.

Does the cover protect the legs as well?

Yes. At 75 cm high, the CS-TC100 covers the tabletop, frame and legs.

My table is taller than 75 cm. Can I still use it?

Yes, as long as the length and width stay within 100 × 100 cm. The cover will stop short of the ground, which improves ventilation.

Is the cover waterproof?

Yes. ProCap® has welded seams and keeps water out. The fabric is also breathable, so moisture under the cover can escape.

How do I secure it?

With the drawcord and toggle around the bottom hem and the four Click-and-Close straps around the table legs.

How do I clean it?

Use lukewarm water and a soft cloth. If needed, the cover can go in the washing machine at up to 30 °C.

Not sure about the size? Compare your table’s measurements with all our covers in the size finder.

Order before 5 pm on a working day and we ship the same day.